At the end of every winter, as the last of the snow melts away, you’re left with a big question: what should you do with your snowblower? If you’re like most people, you probably don’t have a lot of extra space in your garage for seasonal storage.
But never fear! With a little bit of planning, you can easily find a place for your snowblower that won’t cramp your style.
What You'll Learn Today
Is it OK to Store a Snowblower in Garage?
It is absolutely fine to store your snowblower in the garage. In fact, it is one of the best places to keep it. The garage offers protection from the elements and keeps the snowblower out of the way when it is not needed.
However, there are a few things to keep in mind when storing a snowblower in the garage.
First, make sure that the snowblower is clean and dry before storing it. This will help to prevent rust and corrosion. Second, if possible, store the snowblower on a platform or in a storage shed. This will help to keep it off the ground and away from any potential flooding.
Finally, be sure to check on the snowblower regularly to make sure that it is still in good condition. With a little care, your snowblower will be just fine stored in the garage.
How to Store a Snowblower in a Garage: Step by Step
Most people only think about their snowblower when the first flakes of snow start to fall. But if you want your snowblower to be ready to go when you need it, it’s important to give it some care and attention even when there’s no snow on the ground.
Here’s a step-by-step guide to storing your snowblower in the garage.
1. Drain the Fuel Tank
Preparing your snowblower for storage is important to extend its lifespan and keep it in good condition. One of the most important steps is draining the fuel tank. This will prevent the fuel from gumming up and damaging the engine.
To do this, simply run the snowblower until it runs out of fuel. Then, add a fuel stabilizer to the tank and run the engine for a few minutes to circulate it through the system. Once you’ve taken these steps, your snowblower will be ready for storage until next season.
Not sure how to drain the fuel tank? Check the manufacturer’s guide for more information, but here’s some good advice to follow:
2. Change Out the Engine Oil
Over time, the oil in the engine will break down and become contaminated with debris, which can cause damage to the engine. By changing the oil, you can help to prolong the life of your snowblower and ensure that it’s ready to go when winter comes again.
After draining the old oil from the engine, remove the oil filter and replace it with a new one. Finally, fill the engine with fresh oil and then start it up to make sure that everything is working properly.
3. Check For Worn Parts That Need to Be Replaced or Repaired
One important part of winterizing your snowblower is making sure that all the parts are in good working order. If any of the parts are worn or damaged, they will need to be replaced or repaired before you can use the snowblower.
The first thing you should do is check the auger for any wear or damage. The auger is the part of the snowblower that actually moves the snow. If it is damaged, it will not be able to move the snow effectively.
Next, check the impeller. The impeller is responsible for throwing the snow up and out of the chute. If it is damaged, it will not be able to throw the snow as far or as well.
Finally, check the skids. The skids help to keep the snowblower from digging into the ground when it is in use. If they are worn, they will need to be replaced before you can use the snowblower.
4. Do Some Maintenance on All Moving Parts
Before storing the snowblower for the season, be sure to do some maintenance on all moving parts. This includes oiling the blades and engine, as well as checking the drive belt for wear.
In addition, it is important to empty the gas tank and add a fuel stabilizer to prevent the gas from going bad over the winter.
5. Protect the Engine
One of the most important things to do is to protect the engine. This can be done by adding a layer of oil to the engine and then covering it with a tarp or plastic sheet. You should also make sure that the snowblower is stored in a dry place, away from any sources of heat or moisture.
6. Clean the Snowblower
After a long season of use, the exterior of a snowblower can become caked with dirt, snow, and ice. To prevent rust and other damage, it is important to clean the machine before storing it for the summer.
The first step is to remove any snow or debris from the auger and chute. Next, use a garden hose to wash away any remaining dirt and grime. Finally, be sure to dry the machine thoroughly before storing it in your garage or shed.
7. Wrap the Snowblower
The final step in storing a snowblower is to cover it up. This will protect the machine from dust and debris, and it will also prevent any small animals from nesting inside. You can use a tarp or a heavy-duty plastic sheet, and make sure that the cover is secured tightly.
8. Find the Best Storage Location in Your Garage
There are a few things to consider when choosing a storage location for your snowblower.
First, you’ll want to choose a spot that is out of the way and not likely to be obstructed by other items in your garage. This will help ensure that your snowblower is always easily accessible. Second, you’ll want to avoid storing your snowblower near any sources of heat, as this could damage the engine.
And finally, if possible, you’ll want to keep your snowblower elevated off the ground so that it doesn’t sit in any puddles or pooled water.
What is the Best Way to Store a Snowblower?
When the snow starts to fall, you want to be able to rely on your snowblower to get the job done. But what is the best way to store a snowblower when it’s not in use?
Ideally, you should keep your snowblower in a garage or shed where it will be protected from the elements. However, if you don’t have access to a garage or shed, you can also cover your snowblower with a tarp or plastic sheeting.
In any event, by following these simple tips, you can easily store your snowblower in your garage without taking up too much space or risking damage to the machine.
By taking a little bit of time to prepare, you can rest assured knowing that your snowblower will be ready to go when winter comes around again.
